EDU2AE-TOP-Expand

Torque Controller

The Expand version offers all the functionality of the EDU2AE/TOP with the addtion of a USB flash drive (for uploading and downloading data) and special Expand software for your PC. Now you can set the controller parameters from the comfort of your chair and then easily download them via the USB into the controller. With this new technology an infinite number of programs can be easily created and stored for future production requirments!

Main Features of the EDU2AE/TOP/Expand:

• One controller for a torque range of 2.6 to 442 in-lbs, depending on driver used.
• Easy to program user interface screens.
• Eight independant P-sets; with one PLUTO Driver you can replace up to 8 conventional screwdrivers.
• Each program can be adjusted: Torque, Speed, Hard/Soft Joint, Number of Screws to be tightened, Number of Rejects allowed, Minimum screwing time, Maximum screwing time, Ramp (slow start), Auto-reverse, Program sequence, Soft stop.
• Password protected.
• Statistics menu with summary of number of screws, and the number of assemblies completed.
• 15 input and 11 output connectors: all functions can also be controlled remotely.
• Serial port for retreival of rundown data.
• Optional Switch box or Socket/Bit tray.
• RS232 Serial Port for live data stream reporting
• PC programming (USB Port): it is possible to set, change and save all parameters through our new "EDU EXPAND" software for PC. It is also possible to upload via USB drive all parameters/programs previously set on "EDU EXPAND". Just connect your USB to the port and recall the desired programs on the menu. The programs set on control unit can be downloaded on USB and recalled on another unit equipped with the Expand package.
• Saving/programming on mini USB flash drive (Back Panel): you can now save the results of each screwing operation directly on USB pen drive!
  
  

User definable parameters:

1. Driver Model
2. Torque level adjustment: 2.6 to 442 in-lbs (tool dependent)
3. Joint type (HARD or SOFT) selects RPM profile
4. Break Time: down shift speed from pre-torque to final toque when in the Hard Joint RPM profile
5. Ramp Time: select from 0.2 to 3.0 Seconds
6. Speed: tool dependent
7. Minimum Time: select from 0.1s to MAX - 0.1s. Torque reached before this time will not activate torque output signal.
8. Maximum Time: select from MIN + 0.1 s to 20 sec. If torque is not reach before the MAX time the screwdriver will stop and an error message will be displayed.
9. Reverse:
10. Reverse Time:
11. Reverse Torque:
12. Language: English, Italian, German, Spanish (French and Portuguese on request)
13. Thread cutting programmable in 1/2 second.
14. Rotation: Left or Right
15. Change password.
16. Password On or Off.
17. Calibration
18. Compensation
19. Unit: In/lbs or Nm.
20. Torque: Min Setting
21. Torque: Max Setting
22. Number of Screws
23. OK/ESC
24. Number or Cycles

Items that ship with this unit:

• 110V AC power cord

Details & Specifications